5,000 公斤/11,023 磅起重能力和安全系数为4:1（C5）
6,000 kgs./13,227 lbs. lifting capacity and a safety factor of 3:1 (C6)
The life span of the C6 automatic lifting clamp is limited to 20,000 lifts. (UNE-EN-13155)
Roller for Chains
Hand grip that can be used as a second lifting point
High-Brightness LED Status Indicator
Main Specs of the C5 & C6 Lifting Clamps
Horizontal Lifting Clamps
The C5 & C6 automatic horizontal lifting clamps
have been designed for lifting and transferring
steel plates, beams and pipe lifting clamps in a secure and safe manner.
Once the automatic clamps are fixed to the load that is being lifted,
the automated process takes over. The crane driver/operator
ensures by using the eMAX remote control that the lifting clamps
are all in the same position before every lift.
This information is relayed in real time and should there be any difference in the
clamp’s states, the remote control informs the crane operator immediately.
Once all clamps are confirmed ready, the lifting operation can commence.
LED Status Indicator
The High-Brightness LED status indicator is an additional safety measure
that indicates the Lifting Clamp’s status at all times. With this feature operators
receive visual confirmation that the automatic release clamp is working properly.
Green: Unlocked / Release Load
Red: Intermediate: Do Not Lift!
Blue: Locked / Lift Load
White: Low Battery
Ergonomic & Simple to Use
The C5 & C6 automatic release clamps include a roller for chains or slings
and a hand grip that can also be used as a second lifting point. The hand grip allows the
operator to manually maneuver the clamp whilst fixing it on the desired surface.
Change and Replace
Easy to replace weared parts and to change the tip if to be used as a
Pipe Lifting Clamp, a Beam Lifting Clamp or a Plate Lifting Clamp.
See them in Action!
Safety Tests with Steel Plates
More than Efficient
With the high-capacity battery, a simple 3 hour charge allows
for more than 5.000 cycles or over 250 hours in standby mode.
The new 14 segment E-ink charge status display along with new
electronics and rechargeable Li-Ion technology guarantee an
optimal autonomy and consumption of the battery.
Charge the batteries with the Multiple Charger that’s compatible
with the C5 and C6 lifting clamps’ batteries. The Multiple Charger
can charge up to ten batteries simultaneously.
Open and close the C5 & C6 clamps or receive real-time information of weight,
battery level, and other values of the lifting and manoeuvring operation.
Just like the rest of our lifting products,
the automatic lifting clamps can be paired to any of our remote controls.
Impossible to release the load while it is placed on the lifting clamp with automatic release.
Just like the complete range of our lifting products, the automatic release lifting clamps are
designed under a fail-safe principle that makes it impossible to drop a suspended load.
The C5 & C6 lifting clamps certify with the following regulatory standards:
|ASME B30.10-2009 (C5)
|ASME B30.20-2010 (C5)
|UNE-EN 13155: 2021 (C6)
|EN 10204 3.1.B
Directive on Machine Safety (D2006/42/EC).
EMC Directive (2014/30/EU).
Low Voltage Directive (2014/35/EU).
Radio Equipment Directive (2014/53/EU).
Assurance of Production Quality in accordance with ISO9001.
ARIB Construction Design Certification Number 203-JN0689.
FCC Identifier 2ACLHEVO for Equipment Class: Digital Transmission System.
Each mechanism is delivered with the CE stamp and a declaration of CE conformity.
elebia is a member of F.E.M. (European Federation of Materials Handling).
Ideal for lifting and transferring steel plates, beams or pipes in a secure and safe matter,
minimising risks, enhancing safety and increasing productivity in all your lifting operations.
Pipe Lifting Clamp
For horizontal lifting and moving of steel and concrete pipes. Thanks to the automatic release feature, the unloading operation is twice as fast, improving productivity. The pipe lifting clamp must always be used in pairs. The Working Load Limit indicated is per lifting clamp.
Plate Lifting Clamp
For horizontal lifting and moving of steel plates. The clamp’s flat tip effectively inserts into small clearances, securing the load before each lift. This plate lifting clamp must always be used in pairs (or multiples). The Working Load Limit indicated is per lifting clamp.
Beam Lifting Clamp
For horizontal lifting and transportation of steel (H) beams. Replace the tip with tip for beams to lift beams safely and securely. The beam lifting clamp must always be used in pairs. The Working Load Limit indicated is per lifting clamp.
configure your C5 & C6
horizontal lifting clamps.
Schedule a Demo
Want to see in person how
your company can benefit by
using the C5 & C6 clamps?
All the info you need
and more, of the C5 & C6
horizontal lifting clamps.
Receive a quote for your
C5 & C6 lifting clamps or any
other product and accessory.